EV Charger Installation
NextPhase Energy
Home EV Charger Installation in Selby & Surrounding Areas
Make charging your electric car simple, fast, and safe with a dedicated charger installed by local, OZEV-approved professionals.
Why Install a Proper EV Charger?
Plugging into a 3-pin socket might work, but it’s far from ideal. A dedicated charger gives you more speed, safety, and control.
We’ll give you straight advice, explain your options, and help you pick a charger that actually suits your lifestyle.
⚡ Faster Charging
A proper EV charger cuts your charging time dramatically. No more waiting overnight just to get 30 miles of range.
🛡 Safer for Your Home
We install chargers with built-in protection and load control. No overheating cables or stress on your fuseboard.
📱 Smart Features
Schedule charges, track energy use, and take advantage of off-peak rates — all from your phone.
🧠 Future-Proof Setup
Tethered or untethered, single-phase or three-phase — we install what fits your car, home, and long-term needs.
What to Expect from Our Installations
✅ Site survey & planning
We assess where your charger will go, how cables will run, and what upgrades (if any) are needed.
✅ Charger advice you can actually use
We’ll help you choose a charger that works with your vehicle, budget, and how you drive.
✅ Clean, professional install
No mess, no guesswork. We install properly — neatly clipped cables, smart placement, and full testing.
✅ Certification & support
Once we’re done, you’ll get full paperwork, and we’re still here if you need anything down the line.
Most installs are done in a day — and you’ll be ready to charge that night.
What to Ask Before You Book Your EV Charger Install
🟦 What charger are you fitting?
We’ll help you choose the right charger for your vehicle and property — whether that’s a tethered model or a smart untethered unit. Every EV charger installation we do in Selby is tailored to the customer.
🟦 How are you going to run the cable?
We’ll talk you through the cable route, any drilling required, and make sure it’s clipped neatly and safely. No ugly conduit across your driveway.
🟦 Is my main fuse big enough?
We’ll check your fuse size and whether any upgrades are needed to install your charger safely and legally.
🟦 Do I need another fuse board?
In most cases, no. But we’ll confirm if your existing consumer unit is suitable or if an additional board is required.
🟦 Do you contact my electrical supplier?
Yes — if your install needs approval (like load capacity or meter tails), we’ll handle the paperwork.
🟦 What certification do I get?
You’ll receive an installation certificate and a building control notification (Part P). We’re NAPIT registered and everything is done to regs.
We install home and workplace chargers
Not Sure What You Need?
We know there’s a lot of EV charger options out there. If you’re in Selby, Goole, Swinefleet or nearby and just want honest advice, get in touch. We’ll help you figure out what works best without any pressure or jargon.
Our Services
EV Charger Brands We Install
Zappi
The Zappi is a smart charger that adapts to your electricity usage and can time charging to off-peak hours, saving you money. It’s brilliant if you want to make the most of renewable energy or cheaper night-time rates. We install and configure it fully, so it’s ready to use from day one.
Hypervolt
Hypervolt is fast and reliable, delivering a consistent charge and working with most electric vehicles on the market. It’s a straightforward choice if you want dependable performance without unnecessary complexity. We handle all the installation and testing.
Ohme
Ohme chargers are flexible and affordable, designed for drivers who want simplicity. If you’re new to EV ownership, Ohme is an excellent choice. We fit it, wire it properly, and make sure it integrates with your home’s electrics.
Typical Installation Cost
Most EV charger installations cost between £800 and £1,200, depending on three main factors. The length of cable run from your consumer unit to the proposed charger location can add cost if it needs to go a long way. Your current board capacity matters too. Some boards need upgrading before a charger can be safely fitted. Finally, the charger you choose affects the price. We’ll give you a fixed quote after a site visit, so no surprises.
EV Charger Installation FAQs
How much does an EV charger cost to install?
Most installations run between £800 and £1,200 depending on cable length, board capacity, and the charger model. We give a fixed quote after surveying your property.
How long does installation take?
A typical installation takes 1 to 2 days. We handle all the wiring, testing, and setup. Your charger’s ready to use when we leave.
Do I need to upgrade my fuse board for an EV charger?
Possibly. Modern chargers need adequate board capacity. We survey your property and advise if a fuse board upgrade is necessary. If it is, we can do that too.
Which EV charger is best for my home?
That depends on your budget, vehicle type, and usage patterns. Zappi suits drivers wanting smart charging, Hypervolt is reliable and fast, Ohme is simple and affordable. We discuss options during your free survey and recommend what fits your situation.